上海強升印染機械有限公司/上海衛強印染機械有限公司 |
|
聯系人:姜強 經理 | 電話:021-58908542 |
傳真: | 地址:上海市川沙川環南路921弄7號 |
郵編:201200 | 郵箱:service@wqjx.com.cn |
網址:http://www.qsyj.net/ |
WQ0904長環蒸化機(LO0PSTEAMER)
本機供滌面、純棉、混紡、化纖織物或其他織物印花后的蒸化固色
This range is applied for steaming and color fixing after the fabrics being printing ,such as the fabrics of polyester/cittibmbkebds abd chemical fibre.
(一).主要規格及技術特征:
公稱速度Norminal speed:m/min:30-50;
公稱寬度RollerWidth(mm):1600、1800、2000、2200、2400、2600、2800、3000、3200;
容布量Cloth content(m):140,210,280,350,420
傳動方式Driving system:全機采用交流變頻控制,人機屆面.the speed of this range is regulated by A.C variable frequency motors.
使用壓縮空氣壓力Supplied compressed air pressure(Mpa):0.3-0.5
蒸汽壓力Steam Pressure(Mpa):0.3-0.4
水壓Water pressure(Mpa):0.2-0.3b
飽和蒸汽蒸化溫度Saturated steaming temperature(℃):101
(二).機器的組成:The Composing of Machine
1.進布架:Fabric entry scattold
2.開幅裝置:Opening apparus way
3.長環蒸化器:Loop ager
主要包括離心風機,蒸汽箱頭段和尾段以及若干中段(每個中段容布量70m,每中段帶二個循環風機,二個加熱器等),帶蒸汽加熱的頂,進出布氣風口,帶照明的觀察窗、進布輥、鏈條導軌、掛布輥鏈條、鏈輪、掛布輥、主傳動、空氣含量測試儀、電器柜、帶離合器的出布調速裝置等。
Mainly include : exhaust fan , entry and exit sections of steamer and Several inter mediate sections .( fabric capacity of each 70m ,with two recirculation fans and tus heating radiators ect .) ,heated roof , entry and exit locks in floor , viewing , windows with lighting fittings , entry roller 、chain guide tracks 、supporting rod chain 、chain wheel 、supporting test instrment、electrical switchgear 、exit roller with clutch 、fabric exit speed regulator with detecting device for fabric capacity ect
4.給濕裝置:Steam humidifier
主要包括離心泵、噴嘴、閥門和管件。溫度波動可控制在2℃。
Manly include: Multievel centrifugal pump , spray nozzle , Valve and pipework. COmpensating temperature fluctuations up to Max 2℃.
5.飽和蒸汽發生器:Steam saturator
6.新空氣補給裝置:Fresh air supplying device
7.一套安裝管件:A set of installation pipework
主要包括帶過濾網的截止閥、減壓閥、汽水分離器等。
Mainly including main stop valve with fiter, reducer valve ,steam And water separator.
8.出布架:Fabric exit scaffold
9.交流電動傳動:Ac motor drive
10.熱油循環系統:Oil circulation heating system
主要包括加熱器及連接管件等。
Mainly including hot heater and seamless tubular steel for concecting.
11.一組溫度調節系統:A set of moisture adjustment system .
無錫二橡膠股份有限公司 |
常州市潤源經編機械有限公司 |
青島云龍紡織機械有限公司 |
黃石經緯紡織機械有限公司 |