上海強升印染機械有限公司/上海衛強印染機械有限公司 |
|
聯系人:姜強 經理 | 電話:021-58908542 |
傳真: | 地址:上海市川沙川環南路921弄7號 |
郵編:201200 | 郵箱:service@wqjx.com.cn |
網址:http://www.qsyj.net/ |
主要規格:
1 公稱寬度Norminal width;
180型:印花幅寬度1620mm; 200型:印花幅寬度1850mm,同時適用1620mm.
220型:印花幅寬度2050mm,同時適用1850mm. 240型:印花幅寬度22000mm,同時適用2050mm.
260型:印花幅寬度2400mm,同時適用2200mm. 280型:印花幅寬度2600mm,同時適用2400mm.
300型:印花幅寬度2800mm,同時適用2600mm. 320型:印花幅寬度3000mm,同時適用2800mm.
2 公稱速度Norminal speed:80m/min
3.印花套色數Number of colors: 4,6,8,10,12,14,16,20
4.適用圓網周長Circumference of screens:640.726.820.914.1018
5.對花精度:相鄰花位誤差不大于0.1mm,累積對花誤差不大于0.3mmRepeat precision: the deviation is less than 0.1mm between two consecutive screen,accumulative repeat deviationis less than 0.3mm
6.刮漿方式Squeegee:磁棒、刮刀或磁棒刮刀組合Magnetic Bar、Scrapping Knife or Magnetic Bar-Scrapping Knife Combination
7.烘房節數 Number of dryer section:3.4.5
8.烘房網站W(wǎng)orking temperature of dryer:蒸(0.3Mpa)載熱油with heat transfer oil≤150℃
9.進出布方式:平幅進布,平幅干落布
Infeed and delivery systen:infeed in open-width,plaiting in dry in open-width
10.傳動方式:圓網集體傳動或獨立傳動
Driving system:all screen are driven by the same driving shaft of driven seperately主要規格:
1 公稱寬度Norminal width;
180型:印花幅寬度1620mm; 200型:印花幅寬度1850mm,同時適用1620mm.
220型:印花幅寬度2050mm,同時適用1850mm. 240型:印花幅寬度22000mm,同時適用2050mm.
260型:印花幅寬度2400mm,同時適用2200mm. 280型:印花幅寬度2600mm,同時適用2400mm.
300型:印花幅寬度2800mm,同時適用2600mm. 320型:印花幅寬度3000mm,同時適用2800mm.
2 公稱速度Norminal speed:80m/min
3.印花套色數Number of colors: 4,6,8,10,12,14,16,20
4.適用圓網周長Circumference of screens:640.726.820.914.1018
5.對花精度:相鄰花位誤差不大于0.1mm,累積對花誤差不大于0.3mmRepeat precision: the deviation is less than 0.1mm between two consecutive screen,accumulative repeat deviationis less than 0.3mm
6.刮漿方式Squeegee:磁棒、刮刀或磁棒刮刀組合Magnetic Bar、Scrapping Knife or Magnetic Bar-Scrapping Knife Combination
7.烘房節數 Number of dryer section:3.4.5
8.烘房網站W(wǎng)orking temperature of dryer:蒸(0.3Mpa)載熱油with heat transfer oil≤150℃
9.進出布方式:平幅進布,平幅干落布
Infeed and delivery systen:infeed in open-width,plaiting in dry in open-width
10.傳動方式:圓網集體傳動或獨立傳動
Driving system:all screen are driven by the same driving shaft of driven seperately
無錫二橡膠股份有限公司 |
常州市潤源經編機械有限公司 |
青島云龍紡織機械有限公司 |
黃石經緯紡織機械有限公司 |